CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
Disconnect the MB main body ECU (multiplex network body ECU) connector.
| *A | Main Body ECU (Multiplex Network Body ECU) with 3 Connectors | - | - |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
| *a | 3 Connectors | - | - |
Measure the voltage and resistance according to the value(s) in the table below.
Tech Tips
Measure the values on the wire harness side with the connector disconnected.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| MB-11(GND1) - Body ground | - | Ground | Always | Below 1 Ω |
| MB-30 (ACC) - Body ground | - | ACC power supply | Power switch on (ACC) | 11 to 14 V |
| Power switch off | Below 1 V | |||
| MB-31 (BECU) - Body ground | - | Auxiliary battery power supply | Power switch off | 11 to 14 V |
| MB-32 (IG) - Body ground | - | IG power supply | Power switch on (IG) | 11 to 14 V |
| Power switch off | Below 1 V |
If the result is not as specified, there may be a malfunction in the wire harness.
Reconnect the MB main body ECU (multiplex network body ECU) connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| K1-5 (TSW) - Body ground | P - Body ground | Luggage door opening switch signal | Luggage door opening switch on | Below 1 V |
| Power switch off, all doors closed and luggage door opening switch off | Pulse generation | |||
| K2-17 (TMSW) - Body ground | LG - Body ground | Luggage door opening cancel switch signal | Luggage door opening cancel switch on | Below 1 V |
| Power switch off, all doors closed and luggage door opening cancel switch off | Pulse generation | |||
| 4D-16 (LGCY) - Body ground | G - Body ground | Luggage compartment door courtesy light switch assembly input signal | Luggage compartment door open | Below 1 V |
| Luggage compartment door closed | 11 to 14 V | |||
| 4D-1 (TR+) - Body ground | B - Body ground | Luggage compartment door lock relay output signal | Luggage door opening switch on | Below 1 V |
| Luggage door opening switch off | 11 to 14 V |
If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may be malfunctioning.
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)