SLIDING ROOF SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SLIDING ROOF SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Power Window.

      5. Select the setting by referring to the table below.


        Power Window
        Tester Display Description Default Setting ECU
        Door Key P/W Up This function is used to close the power windows and sliding roof by operating the mechanical key. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down This function is used to open the power windows and sliding roof by operating the mechanical key. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Up W/ Transmit This function is used to close the power windows and sliding roof using the wireless key transmitter. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit This function is used to open the power windows and sliding roof using the wireless key transmitter. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

      6. Enter the following menus: Customize Setting / Slide Roof.

      7. Select the setting by referring to the table below.


        Slide Roof
        Tester Display Description Default Setting ECU
        Door Key Related Operation Function to select tilt up or slide open of sliding roof key-linked function. Slide 0:Slide,1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
        Wireless Key Related Operation Function to select tilt up or slide open of sliding roof wireless transmitter-linked function. Slide 0:Slide,1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
        Front SW Auto Operation This function is used to enable or disable auto operation. ON 0:OFF,1:ON Sliding roof ECU (Sliding roof drive gear sub-assembly)

      8. Enter the following menus: Customize Setting / Security.

      9. Select the setting by referring to the table below.


        Security
        Tester Display Description Default Setting ECU
        Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)