HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas a through f are within each standard range.

      A011OPVN04
      Standard Clearance
      Area Measurement Area Measurement
      a 2.95 to 6.95 mm (0.116 to 0.274 in.) b -2.15 to 1.85 mm (-0.0846 to 0.0728 in.)
      c 2.15 to 6.15 mm (0.0846 to 0.242 in.) d -2.05 to 1.95 mm (-0.0807 to 0.0768 in.)
      e 2.2 to 5.2 mm (0.0866 to 0.205 in.) f -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)