SFI SYSTEM(w/ EGR System) REGISTRATION

CAUTION / NOTICE / HINT

Note

The Vehicle Identification Number (VIN) or frame number must be written into a replacement ECM.

PROCEDURE


  1. DESCRIPTION

    Tech Tips

    This registration section consists of 2 parts: Read VIN or Frame Number and Write VIN or Frame Number.


    1. Read VIN or Frame Number: This procedure allows the VIN or frame number stored in the ECM to be read in order to confirm that the VINs or frame numbers, provided on the vehicle body and stored in the vehicle ECM, are the same.

    2. Write VIN or Frame Number: This procedure allows the VIN or frame number to be written into the ECM. If the ECM is replaced, or the ECM VIN or frame number and vehicle VIN or frame number do not match, the VIN or frame number can be registered, or overwritten in the ECM by following this procedure.

  2. READ VIN OR FRAME NUMBER


    1. Confirm the vehicle VIN or frame number.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Read.


      Powertrain > Engine and ECT > Utility
      Tester Display
      VIN

    6. According to the display on the GTS, read the frame number or VIN stored in the ECM.

  3. WRITE VIN OR FRAME NUMBER


    1. Confirm the vehicle VIN or frame number.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Write.


      Powertrain > Engine and ECT > Utility
      Tester Display
      VIN

    6. According to the display on the GTS, write the vehicle frame number or VIN to the ECM.