PROCEDURE
TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
If necessary, tighten the bolts and nuts on the chassis parts listed below.
Front axle and suspension
Drivetrain
Rear axle and suspension
Brake system
Engine mounts
Other chassis parts
If necessary, tighten the bolts and nuts on the body parts listed below.
Seat belt system
Seats
Doors and hood
Body mounts
Fuel tank
Exhaust system
Other body parts
REPLACE AIR CONDITIONING FILTER
Remove the air conditioning filter.
Visually inspect the surface of the air conditioning filter.
If the air conditioning filter is contaminated with foreign matter, replace it.
ROAD TEST
Check the engine and chassis for abnormal noises.
Check that the vehicle does not wander or pull to one side.
Check that the brakes work properly and do not drag.
Bed-in the parking brake shoes to the drums.
BODY INSPECTION
Check the body exterior for dents, scratches and rust.
Check the underbody for rust and damage.
If necessary, replace the damaged part or repair the damaged area.
FINAL INSPECTION
Check the operation of the body parts.
Hood
Auxiliary catch operates properly.
Hood locks securely when closed.
Front and rear doors
Door locks operate properly.
Doors close properly.
Luggage compartment door
Luggage compartment door opens and closes properly.
Seats
Seats adjust easily and lock securely in any position.
Front seatbacks lock securely in any position.
Fold-down rear seatbacks lock securely.
Be sure to deliver a clean car. Make sure to check the following:
Steering wheel
Shift lever knob
All switches and knobs
Door handles
Seats