BRAKE GENERAL MAINTENANCE

PROCEDURE


  1. INSPECT BRAKE LINE PIPES AND HOSES

    A011NDL

    Tech Tips

    Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


    1. Using a mirror, check the entire circumference and length of the brake lines and hoses for:


      • Damage

      • Wear

      • Deformation

      • Cracks

      • Kinks

      • Corrosion

      • Leaks

      • Twists

    2. Check all the clamps for tightness and check the connections for leakage.

    3. Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.

    4. Check that the lines are installed properly and pass through the center of the grommets.

  2. INSPECT BRAKE PEDAL


    1. Check the brake pedal.

      for LHD: Click here

      for RHD: Click here

  3. INSPECT PARKING BRAKE


    1. Check the parking brake shoe clearance and parking brake pedal travel.

      Click here

    2. Check the parking brake cables to ensure that they are not deformed or binding.

  4. INSPECT PARKING BRAKE LININGS AND DRUMS


    1. Check the parking brake linings and drums.

      Click here

  5. INSPECT FRONT BRAKE


    1. Check the front brake pads and discs.

      Click here

  6. INSPECT REAR BRAKE


    1. Check the rear brake pads and discs.

      Click here

  7. INSPECT OR CHANGE BRAKE FLUID


    1. Inspect or change the brake fluid.

      Click here

      Fluid
      SAE J1703 or FMVSS No. 116 DOT3