ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 REAR FLOOR HOUSING SHIELD

    Click here

  2. REMOVE ROCKER PANEL MOULDING ASSEMBLY


    1. Apply protective tape around the rocker panel moulding assembly and door.

      A0126THC02
      B003V9P Protective Tape - -
    2. A0125XW

      Remove the screw and clip.

    3. A0125I4

      Remove the screw.

    4. A0123BDC02
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the other rocker panel moulding cover.

    5. A0123VC

      Remove the 6 clips.

    6. Remove the 2 screws.

    7. A0125Y5

      Disengage the 11 clips and remove the rocker panel moulding assembly.

    8. Remove the 11 clips from the rocker panel moulding assembly.