REAR BUMPER REASSEMBLY

PROCEDURE


  1. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

    A0124O9

    1. Install the rear bumper reinforcement sub-assembly with the 8 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  2. INSTALL REAR BUMPER ENERGY ABSORBER


    1. A0127OW

      Engage the 2 guides to install the rear bumper energy absorber.

  3. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT LH


    1. B003WWT

      Engage the guide and claw.

    2. B003W29

      Install the 2 screws.

    3. B003UA0

      Install the No. 1 rear bumper side support LH with a new grommet.

  4. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. B003WHP

      Engage the 4 claws.

    2. B003TW1

      Engage the 3 clips to install the No. 2 rear bumper side support LH as shown in the illustration.

  6. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. INSTALL REAR BUMPER UPPER RETAINER LH

    Click here

  8. INSTALL REAR BUMPER UPPER RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  10. INSTALL REAR LIGHT COVER (for LH Side)

    Click here

  11. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  12. INSTALL REAR LIGHT COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  13. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.

  14. INSTALL ULTRASONIC SENSOR WITH CLIP (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for all ultrasonic sensor with clips.

  15. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. Connect the 4 connectors.

      A001I1U

    2. Engage the 4 clamps to install the No. 3 luggage room wire.

  16. INSTALL REAR LOWER BUMPER COVER


    1. Engage the 2 guides and 10 claws.

      A0126QL

    2. Install the 5 clips.

      A01281H

    3. Install the rear lower bumper cover with the 2 screws.

      A01261O

  17. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. A012603

      Engage the guide and claw.

    2. Install the reflex reflector assembly LH with the screw.

  18. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  19. INSTALL REAR BUMPER PIECE


    1. A0126PMC01
      *a Hook

      Engage the hook.

    2. Engage the 2 claws to install the rear bumper piece.

  20. INSTALL REAR BUMPER PAD


    1. Clean off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new rear bumper pad.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A0124OPC01
      *a Line

      Install the rear bumper pad as shown in the illustration.

      Tech Tips


      • Apply the rear bumper pad along the line marked on the rear bumper assembly.

      • Use the same procedure for the RH side and LH side.