REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 REAR BUMPER PLATE


    1. A0124L0C02
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the No. 1 rear bumper plate.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A0124GVC02
      B003V9P Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A0125XN

      Remove the 2 bolts.

    3. A01249O

      Remove the 6 clips.

    4. A012528

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A0124V3

      Disengage the 5 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A0123DR

      Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.