FRONT BUMPER(for Standard) COMPONENTS
ILLUSTRATION
| *1 | COOL AIR INTAKE DUCT SEAL | *2 | FRONT BUMPER ASSEMBLY |
ILLUSTRATION
| *A | w/ Headlight Cleaner System | - | - |
| *1 | HEADLIGHT CLEANER HOSE | *2 | HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
| *3 | HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH | *4 | HEADLIGHT WASHER COVER LH |
| *5 | HEADLIGHT WASHER COVER RH | - | - |
ILLUSTRATION
| *A | w/o Intuitive Parking Assist System | *B | w/ Intuitive Parking Assist System |
| *1 | CONNECTOR BRACKET | *2 | NO. 1 ULTRASONIC SENSOR |
| *3 | NO. 1 ULTRASONIC SENSOR RETAINER | *4 | NO. 2 ULTRASONIC SENSOR |
| *5 | NO. 4 ENGINE ROOM WIRE | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for Type A | *B | for Type B |
| *C | for Type C | - | - |
| *1 | FRONT BUMPER EXTENSION MOUNTING BRACKET | - | - |
ILLUSTRATION
| *A | w/ Lexus Safety System+ | *B | for Type A |
| *C | for Type B | - | - |
| *1 | CLEARANCE LIGHT ASSEMBLY LH | *2 | CLEARANCE LIGHT ASSEMBLY RH |
| *3 | FRONT BUMPER SIDE BRACKET LH | *4 | FRONT BUMPER SIDE BRACKET RH |
| *5 | FRONT ENERGY ABSORBER MOUNTING PLATE | *6 | FRONT FENDER LINER RETAINER |
| *7 | LOWER FRONT BUMPER COVER | *8 | LOWER RADIATOR GRILLE LH |
| *9 | LOWER RADIATOR GRILLE RH | *10 | MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
| *11 | NO. 1 COOL AIR INTAKE DUCT | *12 | NO. 1 FRONT BUMPER BRACKET LH |
| *13 | NO. 1 FRONT BUMPER BRACKET RH | *14 | NO. 1 FRONT BUMPER RETAINER BRACKET |
| *15 | NO. 2 COOL AIR INTAKE DUCT | *16 | NO. 2 FRONT BUMPER RETAINER BRACKET |
| *17 | NO. 2 RADIATOR GRILLE GARNISH | *18 | RADIATOR GRILLE GARNISH |
| *19 | RADIATOR GRILLE PROTECTOR | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | INSIDE RADIATOR GRILLE | *2 | LOWER RADIATOR GRILLE MOULDING |
| *3 | NO. 1 MOULDING TAPE | *4 | NO. 1 RADIATOR GRILLE MOULDING |
| *5 | NO. 2 RADIATOR GRILLE MOULDING | *6 | NO. 3 RADIATOR GRILLE MOULDING |
| *7 | RADIATOR GRILLE (OR FRONT PANEL) EMBLEM | *8 | RADIATOR GRILLE ASSEMBLY |
| *9 | RADIATOR GRILLE BRACKET | *10 | RADIATOR GRILLE MOULDING |
| *11 | NO. 2 LOWER RADIATOR GRILLE | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | FRONT BUMPER ENERGY ABSORBER | *2 | FRONT BUMPER REINFORCEMENT |
| *3 | FRONT BUMPER SIDE RETAINER LH | *4 | FRONT BUMPER SIDE RETAINER RH |
| *5 | POP-UP HOOD CHAMBER WITH SENSOR ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |