NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL FRONT FENDER NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new front fender name plate.


      1. Using a heat light, heat the vehicle body and front fender name plate.

      2. Remove the release paper from the front fender name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the front fender name plate as shown in the illustration.

        for LH Side:

        B003X9AC02
        *a Location Pin - -

        for RH Side:

        B003V9VC02
        *a Location Pin - -

  2. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 3 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 3 luggage compartment door name plate.

      2. Remove the release paper from the No. 3 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 luggage compartment door name plate as shown in the illustration.

        for IS200 t Plate:

        B003TR9C01
        *a Profile of Luggage Compartment Door Panel - -
        Standard Measurement
        Area Measurement Area Measurement
        A 61.7 mm (2.43 in.) B 54.7 mm (2.15 in.)
        C 122.7 mm (4.83 in.) - -

        for IS350 Plate:

        B003XAHC02
        *a Profile of Luggage Compartment Door Panel - -
        Standard Measurement
        Area Measurement Area Measurement
        A 60.8 mm (2.39 in.) B 54.5 mm (2.15 in.)
        C 121.8 mm (4.80 in.) - -

        for IS300 Plate:

        B003WWXC01
        *a Profile of Luggage Compartment Door Panel - -
        Standard Measurement
        Area Measurement Area Measurement
        A 60.8 mm (2.39 in.) B 54.5 mm (2.15 in.)
        C 121.8 mm (4.80 in.) - -

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.

      2. Remove the release paper from the No. 1 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 luggage compartment door name plate as shown in the illustration.

        B003TTXC02
        *a Profile of Luggage Compartment Door Panel - -
        Standard Measurement
        Area Measurement Area Measurement
        A 129.0 mm (5.08 in.) B 54.6 mm (2.15 in.)
        C 61.4 mm (2.42 in.) - -

  4. INSTALL SYMBOL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new symbol emblem.


      1. Using a heat light, heat the vehicle body and symbol emblem.

      2. Remove the release paper from the symbol emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the symbol emblem as shown in the illustration.

        B003UH0C02
        *a Location Pin - -