HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Install the rear height control sensor sub-assembly with the 2 bolts and nut.

      Torque:

      Bolt

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Nut

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Engage the clamp.

   3. Connect the connector.

2. INSTALL REAR WHEEL LH

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. PERFORM INITIALIZATION

   Click here

5. ADJUST HEADLIGHT AIMING

   for LED Type Turn Signal Light: Click here

   for Bulb Type Turn Signal Light: Click here