HORN INSPECTION

PROCEDURE


  1. INSPECT HIGH PITCHED HORN ASSEMBLY


    1. w/ Door Ajar Warning:


      1. B003ULTC06
        *a

        Component without harness connected

        (High Pitched Horn Assembly)
        *b Body ground

        Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal B1-1

        Battery negative (-) → Body ground

        		 Horn sounds

        If the result is not as specified, replace the high pitched horn assembly.

    2. w/o Door Ajar Warning:


      1. A0123C4C01
        *a

        Component without harness connected

        (High Pitched Horn Assembly)
        *b Body ground

        Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal B1-1

        Battery negative (-) → Body ground

        		 Horn sounds

        If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY


    1. w/ Door Ajar Warning:


      1. A0123U2C06
        *a

        Component without harness connected

        (Low Pitched Horn Assembly)
        *b Body ground

        Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal B4-1

        Battery negative (-) → Body ground

        		 Horn sounds

        If the result is not as specified, replace the low pitched horn assembly.

    2. w/o Door Ajar Warning:


      1. A012462C01
        *a

        Component without harness connected

        (Low Pitched Horn Assembly)
        *b Body ground

        Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal B4-1

        Battery negative (-) → Body ground

        		 Horn sounds

        If the result is not as specified, replace the low pitched horn assembly.