HORN REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE SUPER LOW PITCHED HORN ASSEMBLY (w/o Emergency Brake Signal)


    1. A001IYD

      Disconnect the connector.

    2. Remove the bolt and super low pitched horn assembly.

  3. REMOVE HIGH PITCHED HORN ASSEMBLY (w/ Emergency Brake Signal)


    1. for 2GR-FSE:


      1. A001LFO

        Disconnect the connector.

      2. Remove the bolt and high pitched horn assembly.

    2. for 8AR-FTS:


      1. A001IYD

        Disconnect the connector.

      2. Remove the bolt and high pitched horn assembly.

  4. REMOVE LOW PITCHED HORN ASSEMBLY


    1. for 2GR-FSE:


      1. A001HNO

        Disconnect the connector.

      2. Remove the bolt and low pitched horn assembly.

    2. for 8AR-FTS:


      1. A001JQZ

        Disconnect the connector.

      2. Remove the bolt and low pitched horn assembly.