CLEARANCE LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT CLEARANCE LIGHT LED UNIT ASSEMBLY RH


    1. A001KFBC05
      *a

      Component without harness connected

      (Clearance Light LED Unit Assembly RH)

      Apply battery voltage to the clearance light LED unit assembly RH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal A-3

      Battery negative (-) → Terminal A-1

      Battery negative (-) → Terminal A-2

      		 Clearance light comes on

      If the result is not as specified, replace the clearance light LED unit assembly RH.

  2. INSPECT CLEARANCE LIGHT LED UNIT ASSEMBLY LH


    1. A001KFBC05
      *a

      Component without harness connected

      (Clearance Light LED Unit Assembly LH)

      Apply battery voltage to the clearance light LED unit assembly LH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal A-3

      Battery negative (-) → Terminal A-1

      Battery negative (-) → Terminal A-2

      		 Clearance light comes on

      If the result is not as specified, replace the clearance light LED unit assembly LH.