HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL DISCHARGE HEADLIGHT BULB

    Click here

  2. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY

    Click here

  3. INSTALL WASHER INLET SUB-ASSEMBLY (for LH Side)


    1. Engage the 2 claws to install the washer inlet sub-assembly.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here