HIGH INTENSITY DISCHARGE HEADLIGHT BULB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Click here

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE WASHER INLET SUB-ASSEMBLY (for LH Side)


    1. A01MVXR

      Disengage the 2 claws to remove the washer inlet sub-assembly.

  4. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY

    Click here

  5. REMOVE DISCHARGE HEADLIGHT BULB

    Click here