WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. A001JMT

      Remove the 3 screws and front wheel opening extension pad LH.

  3. REMOVE FRONT FENDER LINER LH


    1. A001LFUC01
      *a 90°

      Using a screwdriver, turn the pin 90 degrees clockwise to remove the pin hold clip.

    2. A001L2J

      Remove the 3 screws.

    3. A001JS3

      Remove the 8 screws.

    4. A001K3U

      Remove the clip.

    5. A001INX

      Remove the 7 clips and front fender liner LH.

  4. DRAIN WINDSHIELD WASHER FLUID


    1. A001IYK

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.

      Tech Tips

      Use a container to collect the windshield washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A001J68

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.