WIPER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B003UTA

      Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

    2. Connect the 2 connectors.

  2. INSTALL TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)

    for LH Side Windshield Wiper Switch:

    Click here

  3. INSTALL STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Note

    If the steering column cover (lower) is installed in the incorrect order, the parts may break.


    1. Engage the 2 claws to install the steering column cover (upper).

    2. Engage the 4 clips and 2 claws to connect the instrument cluster finish panel assembly to the steering column cover (upper).

    3. Engage the 3 claws.

    4. B003SWO

      Engage the 2 claws.

    5. B003WWS

      Engage the 2 claws.

    6. Turn the steering wheel assembly to the left and install the screw.

    7. Turn the steering wheel assembly to the right and install the steering column cover (lower) with the screw.

  4. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)


    1. Engage the 2 claws to install the steering column cover (upper).

    2. Engage the 4 clips and 2 claws to connect the instrument cluster finish panel assembly to the steering column cover (upper).

    3. B003SUV

      Temporarily install the steering column cover (lower) as shown in the illustration.

    4. B003TC7

      Engage the 2 claws.

    5. B003W7I

      Engage the 2 claws.

    6. Install the screw.

    7. Turn the steering wheel assembly to the left and install the screw.

    8. Turn the steering wheel assembly to the right and install the steering column cover (lower) with the screw.

  5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here