WIPER SWITCH REMOVAL

PROCEDURE


  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here

  2. REMOVE STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Note

    Removing the steering column cover (lower) in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. B003UI8

      Turn the steering wheel assembly to the left and remove the screw.

    4. B003WY2

      Turn the steering wheel assembly to the right and remove the screw.

    5. B003T09C01
      *a Push

      Push the left side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    6. B003W3ZC01
      *a Push

      Push the right side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    7. B003TM6C01
      *a Claw <A>
      *b Claw <B>

      Insert your fingers into the opening of the tilt lever of the steering column cover (lower) to disengage the claw <A>.

      Tech Tips

      Spread the claw to disengage it.

    8. Disengage the 2 claws <B> to remove the steering column cover (lower).

    9. B003W93

      Disengage the 2 claws and 4 clips to separate the instrument cluster finish panel assembly from the steering column cover (upper).

    10. B003SWY

      Disengage the 2 claws to remove the steering column cover (upper).

  3. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)


    1. B003TET

      Turn the steering wheel assembly to the left and remove the screw.

    2. B003TB7

      Turn the steering wheel assembly to the right and remove the screw.

    3. B003WTY

      Remove the screw.

    4. B003VFPC01
      *a Push

      Push the left side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    5. B003VR4C01
      *a Push

      Push the right side of the steering column cover (lower) to disengage the 2 claws as shown in the illustration.

    6. B003VON

      Disengage the 2 claws.

    7. B003T8X

      Remove the steering column cover (lower) as shown in the illustration.

    8. B003W93

      Disengage the 2 claws and 4 clips to separate the instrument cluster finish panel assembly from the steering column cover (upper).

    9. B003SWY

      Disengage the 2 claws to remove the steering column cover (upper).

  4. REMOVE TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)

    for LH Side Windshield Wiper Switch:

    Click here

  5. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B003TK5

      Disconnect 2 connectors.

    2. B003T8B

      Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.