HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  3. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B003WGO

      Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.

  5. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. B003W0J

      Remove the 2 clips.

    2. Disengage the 2 clamps to remove the hood lock release lever protector.

  6. REMOVE HOOD LOCK ASSEMBLY


    1. B003WM5

      Disconnect the connector.

    2. Remove the 3 bolts.

    3. B003V8L

      Disconnect the hood lock control cable assembly to remove the hood lock assembly.

  7. REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. B003VM3

      Remove the 2 screws.

    2. Disengage the 2 claws to remove the hood lock control cable cover.

  8. REMOVE UPPER FRONT FENDER PROTECTOR

    Click here

  9. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. B003UTB

      Tie a string to the end of the hood lock control cable assembly.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. B003T63C01
      *1 Hood Lock Control Cable Assembly
      *2 Grommet

      Pull out the hood lock control cable assembly from the grommet as shown in the illustration.

      Tech Tips

      Leave the string inside the grommet.

    3. Disconnect the string from the hood lock control cable assembly.

    4. Using a screwdriver, disengage the 5 clamps.

      B003UUAC02
      *1 Hood Lock Control Cable Assembly *2 Clamp

      Tech Tips

      Tape the screwdriver tip before use.

    5. Pull the hood lock control cable assembly from the engine compartment to remove it.