VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A012405C02
      B003V9P Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. A0125J4

      Disengage the 2 claws to remove the vanity light assembly from the bulb holder as shown in the illustration.

  2. REMOVE VANITY LIGHT BULB


    1. Remove the vanity light bulb from the bulb holder.