GENERATOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE ENGINE UNDER COVER

    Click here

  4. REMOVE V-RIBBED BELT

    Click here

  5. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

    Click here

  6. REMOVE COOLER COMPRESSOR ASSEMBLY

    Click here

  7. REMOVE GENERATOR ASSEMBLY


    1. B003VTQ

      Disengage the 2 wire harness clamps.

    2. B003X3F

      Remove the terminal cap.

    3. Remove the nut and disconnect the wire harness from terminal B.

    4. Disconnect the generator assembly connector.

    5. B003VS5

      Disengage the clamp and disconnect the wire harness from the generator bracket.

    6. Remove the nut, stud bolt and disconnect the generator bracket.

    7. B003V13

      Remove the 2 bolts and generator assembly.

    8. B003WE2

      Remove the bolt and generator bracket.