BATTERY CURRENT SENSOR INSTALLATION

PROCEDURE

1. INSTALL BATTERY STATE SENSOR ASSEMBLY

   
   

   1. Connect the battery state sensor assembly connector.

   2. Install the battery state sensor assembly to the battery and tighten the nut.

      Torque:

      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

   3. Connect the engine wire to the battery state sensor assembly with the nut.

      Torque:

      10.2 N*m  { 104 kgf*cm, 8 ft.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here