BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY STATE SENSOR ASSEMBLY


    1. B003WQAC01
      *A for LHD
      *B for RHD

      Remove the nut and disconnect the engine wire from the battery state sensor assembly.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

    2. B003T2EC01
      *A for LHD
      *B for RHD

      Loosen the nut and remove the battery state sensor assembly from the battery.

    3. B003TMIC01
      *A for LHD
      *B for RHD

      Disconnect the battery state sensor assembly connector.