G-BOOK SYSTEM(w/ Telematics Transceiver) REGISTRATION

PROCEDURE


  1. VEHICLE CONTRACT SETTING

    Tech Tips


    • When replacing the radio receiver assembly, it is not necessary to cancel the G-BOOK contract. (If canceled a new G-BOOK contract needs to be created after replacement.)

    • If the radio receiver assembly or telematics transceiver is replaced on vehicles that do not have a contract for the G-BOOK service, perform the vehicle contract setting.

    • If the radio receiver assembly or telematics transceiver is replaced on vehicles that have a contract for the G-BOOK service, perform the vehicle contract setting and the procedure to resume the G-BOOK service and to start the emergency call service.

    A001LA0E10

    1. Check the ID before replacement (when diagnosis can be activated).

      Tech Tips


      • If the radio receiver assembly is replaced, check the G-BOOK ID.

      • If the telematics transceiver is replaced, check the DCM ID.


      1. Enter diagnostic mode.

        Click here

      2. A001JAI

        Select "Service Information" on the "Service Menu" screen.

      3. A001JJL

        Select "G-BOOK Info for Contract" on the "Service Information" screen.

      4. A001KS2

        Check the G-BOOK ID or DCM ID.

        Tech Tips

        The DCM ID is also specified on the telematics transceiver label.

    2. Replace the radio receiver assembly or telematics transceiver.


      1. Replace the radio receiver assembly or telematics transceiver at a dealership.

    3. Check the ID after replacement.

      Tech Tips


      • If the radio receiver assembly is replaced, check the G-BOOK ID.

      • If the telematics transceiver is replaced, check the DCM ID.


      1. Enter diagnostic mode.

        Click here

      2. A001JAI

        Select "Service Information" on the "Service Menu" screen.

      3. A001JJL

        Select "G-BOOK Info for Contract" on the "Service Information" screen.

      4. A001KS2

        Check the G-BOOK ID or DCM ID.

        Tech Tips

        The DCM ID is also specified on the telematics transceiver label.

    4. Fill-in the Vehicle Contract Setting Request Form.

      A001KSJE04

      1. After filling in the Vehicle Contract Setting Request Form, fax it to the G-BOOK center.

        Item Information to Enter Note
        *1 Enter the dealership name. Applicant information
        *2 Enter the name of the applicant. Applicant information
        *3 Enter the fax number of the dealership. Dealership information
        *4 Enter the phone number of the dealership. Dealership information
        *5 Enter the VIN of the vehicle. Vehicle information
        *6

        • Enter the G-BOOK ID of the old unit.

        • Left-align the number.

        • If the radio receiver assembly has not been replaced, it is not necessary to enter this item.

        		 Used as change-request information from the dealership
        *7

        • Enter the DCM ID of the old unit.

        • Left-align the number.

        • If the telematics transceiver has not been replaced, it is not necessary to enter this item.

        		 Used as change-request information from the dealership
        *8

        • Enter the G-BOOK ID of the new unit installed to the vehicle.

        • Left-align the number.

        • If the radio receiver assembly has not been replaced, it is not necessary to enter this item.

        		 Used as change-request information from the dealership
        *9

        • Enter the DCM ID of the new unit installed to the vehicle.

        • Left-align the number.

        • If the telematics transceiver has not been replaced, it is not necessary to enter this item.

        		 Used as change-request information from the dealership
        *10

        • Enter the date when the telematics transceiver is replaced.

        • If the telematics transceiver has not been replaced, it is not necessary to enter this item.

        		 Used as change-request information from the dealership
        *11 Enter the mileage on the odometer when the radio receiver assembly is replaced. Used as change-request information from the dealership
        *12 Enter the date that the mileage was recorded. Used as change-request information from the dealership

    5. Perform the procedure to resume the G-BOOK service.


      1. Select G-BOOK.com.

      2. After the guidance screen is displayed, perform the procedure to resume the G-BOOK service by following the instructions on the screen.

    6. Perform the procedure to start the emergency call service.


      1. After completing the procedure to resume the G-BOOK service, perform the procedure to start the emergency call service by following the instructions on the screen.

        Tech Tips

        The emergency call service will be available when the procedure is completed successfully.