NAVIGATION RECEIVER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  6. REMOVE FRONT PANEL GARNISH LH

    Click here

  7. REMOVE FRONT PANEL GARNISH RH

    Click here

  8. REMOVE CONSOLE PANEL SUB-ASSEMBLY

    Click here

  9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  10. REMOVE NO. 1 RADIO BRACKET

    Click here

  11. REMOVE NO. 2 RADIO BRACKET

    Click here

  12. REMOVE HARD DISK DRIVE (w/ G-BOOK System)

    Click here

  13. REMOVE RADIO RECEIVER ASSEMBLY