MULTI-DISPLAY INSTALLATION

PROCEDURE

1. INSTALL MULTI-DISPLAY ASSEMBLY

2. INSTALL NO. 1 MULTI-DISPLAY BRACKET

   
   

   1. Install the No. 1 multi-display bracket with the 2 screws.

3. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET

   
   

   1. Engage the clamp.

   2. Connect each connector.

   3. 

      Push the multi-display assembly with bracket as shown in the illustration to engage the 4 clips.

   4. Install the multi-display assembly with bracket with the 2 bolts.

4. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

5. INSTALL METER HOOD SUB-ASSEMBLY

   Click here

6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

7. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here