| DTC Code | DTC Name |
|---|---|
| B15C8 | Digital TV Antenna 1 Disconnected |
DESCRIPTION
This DTC is stored when a malfunction occurs in the television antenna assembly which is connected to the radio receiver assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C8 | Digital TV Antenna 1 Disconnected | Television antenna assembly is not connected. |
|
CAUTION / NOTICE / HINT
Note
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
PROCEDURE
REPLACE HARNESS AND CONNECTOR (NO. 3 ANTENNA CORD SUB-ASSEMBLY - RADIO RECEIVER ASSEMBLY)
Replace the harness and connector.
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END |
| NG |
|
REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY
Replace the No. 3 antenna cord sub-assembly.
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END |
| NG |
|
REPLACE TELEVISION ANTENNA ASSEMBLY
Replace the television antenna assembly.
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END |
| NG |
|
REPLACE RADIO RECEIVER ASSEMBLY Click here |