STEREO COMPONENT AMPLIFIER INSTALLATION

PROCEDURE


  1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

  2. INSTALL NO. 2 AMPLIFIER BRACKET


    1. Install the No. 2 amplifier bracket with the 2 screws.

  3. INSTALL NO. 1 AMPLIFIER BRACKET


    1. Install the No. 1 amplifier bracket with the 2 screws.

  4. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    1. Engage the clamp.

    2. Connect each connector.

    3. A0123BAN01

      Push the stereo component amplifier assembly with bracket in the direction indicated by the arrow (1).

    4. Push the stereo component amplifier assembly with bracket in the direction indicated by the arrow (2).

    5. Install the stereo component amplifier assembly with bracket with the 2 nuts.

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

  6. INSTALL NO. 1 ROOM PARTITION COVER (for Fold Down Seat Type)

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

    Click here

  7. INSTALL REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)

    Click here

  8. INSTALL REAR SEAT ASSEMBLY

    for Fixed Seat Type: Click here

    for Fold Down Seat Type: Click here

  9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

    Click here

  10. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

  11. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  12. INSTALL DECK SIDE TRIM BOX RH

    Click here

  13. INSTALL DECK SIDE TRIM BOX LH

    Click here

  14. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

  15. INSTALL SPARE WHEEL COVER TRAY RH (w/ Spare Tire)

    Click here

  16. INSTALL SPARE WHEEL COVER TRAY LH (w/ Spare Tire)

    Click here

  17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here