ASC SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever an ASC system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / ASC / Trouble Codes.


      Body Electrical > ASC > Trouble Codes

    5. Select a DTC to display its freeze frame data.


      Body Electrical > ASC
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Sound State Dynamic engine sound output status Stopping or Sounding

      Stopping: Dynamic engine sound stopped

      Sounding: Dynamic engine sound being output

      		 -
      Mute Mute setting OFF or ON

      OFF: Mute off

      ON: Mute on

      		 -
      Gear Position (D Range) Gear position information 1st, 2nd, 3rd, 4th, 5th, 6th, 7th or 8th Actual gear position -
      Suppositional Engine Speed (Target Value) Calculated engine speed in the stereo component equalizer assembly

      Min.: 0 rpm

      Max.: 8000 rpm

      		 Changes according to driving conditions (accelerator pedal opening angle, vehicle speed, etc.) -
      Volume SW Vehicle sound switch on/off status OFF or ON

      OFF: Vehicle sound switch off

      ON: Vehicle sound switch on

      		 -
      Speaker Disconnection Inspection State of wire harness between stereo component equalizer assembly and No. 1 speaker assembly with box OFF or Inspecting

      OFF: Open not detected

      Inspecting: Open detected

      		 -
      Volume Switch Voltage The VSLI terminal voltage to the CPU of the stereo compartment equalizer assembly

      Min.: 0.00 V

      Max.: 5.00 V

      		 Changes according to vehicle sound switch volume setting -
      Vehicle Speed Maximum wheel speed sensor reading

      Min.: 0.00 km/h

      Max.: 655.35 km/h

      		 Actual vehicle speed -
      Accelerator Position Accelerator pedal opening angle

      Min.: 0.0 %

      Max.: 111.0 %

      		 Actual accelerator pedal opening angle -
      Shift SW Status (P Range) Park/Neutral position switch status OFF or ON

      OFF: Shift lever in any position other than P

      ON: Shift lever in P

      		 -
      Shift SW Status (R Range) Shift lever position (R) OFF or ON

      OFF: Shift lever in any position other than R

      ON: Shift lever in R

      		 -
      Shift SW Status (D Range) Shift lever position (D) OFF or ON

      OFF: Shift lever in any position other than D

      ON: Shift lever in D

      		 -
      Shift SW Status (N Range) Shift lever position (N) OFF or ON

      OFF: Shift lever in any position other than N

      ON: Shift lever in N

      		 -
      Gear Position (Sports Mode) Gear position information with shift lever in M Not Sports Mode, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th or 8th

      Not Sports Mode: Shift lever in any position other than M

      1st: 1st gear selected

      2nd: 2nd gear selected

      3rd: 3rd gear selected

      4th: 4th gear selected

      5th: 5th gear selected

      6th: 6th gear selected

      7th: 7th gear selected

      8th: 8th gear selected

      		 -
      Current Gear Position (D Range) Current gear position information 1st, 2nd, 3rd, 4th, 5th, 6th, 7th or 8th Current gear position displayed (1st, 2nd, 3rd, 4th, 5th, 6th, 7th or 8th) -
      Drive Mode Status Drive mode status Normal, Power, Sport, Sport+, Comfort, ECO or Customize Actual drive mode -
      Integrated Sport Mode Indicator Drive mode (SPORT) status OFF or Lighting

      OFF: Drive mode other than SPORT mode selected

      Lighting: SPORT mode selected

      		 -
      SNOW Mode Indicator SNOW mode indicator illumination status OFF or Lighting

      OFF: SNOW mode indicator not illuminated

      Lighting: SNOW mode indicator illuminated

      		 -
      ECO Mode Indicator ECO mode indicator illumination status OFF or Lighting

      OFF: ECO mode indicator not illuminated

      Lighting: ECO mode indicator illuminated

      		 -
      Powertrain Customize Status Powertrain customize status NONE, POWER, ECO or NORMAL Displays current powertrain customization status -
      Integrated Sport Mode Status Drive mode (SPORT S or SPORT S+) status Not Sport, PWR & Chassis, Chassis or PWR

      Not Sport: Drive mode other than SPORT S or SPORT S+ mode selected

      PWR & Chassis: SPORT S+ mode selected

      PWR: SPORT S mode selected

      		 -
      Engine Revolution Actual engine speed

      Min.: 0 rpm

      Max.: 10000 rpm

      		 Actual engine speed -
      Gear Shifting Signal Shifting status OFF or ON

      OFF: Gear not being changed

      ON: Gear being changed

      		 -
      Number of DTC Number of trouble codes

      Min.: 0

      Max.: 255

      		 Number of DTCs displayed -

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTCs will also clear the freeze frame data.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Clear the DTCs and freeze frame data.


      Body Electrical > ASC > Clear DTCs