STEERING CONTROL ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL FRONT STEERING CONTROL ECU

   
   

   1. Install the front steering control ECU with the 2 bolts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Tech Tips

      Align the positioning boss of the blower assembly with the hole of the front steering control ECU.

   2. Connect the 4 connectors to front steering control ECU.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Tech Tips

   Use the same procedure for RHD and LHD.

   Click here

3. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

   Tech Tips

   Use the same procedure for RHD and LHD.

   Click here

4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Tech Tips

   Use the same procedure for RHD and LHD.

   Click here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Tech Tips

   Use the same procedure for RHD and LHD.

   Click here

6. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION

   Click here