VARIABLE GEAR RATIO STEERING SYSTEM, Diagnostic DTC:C1592/52

DTC Code DTC Name
C1592/52 Actuator Neutral Position Calibration Incomplete

DESCRIPTION

The VGRS ECU (front steering control ECU) first checks the actuator angle neutral point calibration flag after entering test mode. If the ECU detects that steering actuator angle neutral point calibration is incomplete twice, it stores DTC C1592/52.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition
C1592/52 Actuator Neutral Position Calibration Incomplete The VGRS ECU (front steering control ECU) detects that steering actuator angle neutral point calibration is incomplete twice.
  • Steering actuator assembly

  • VGRS ECU (front steering control ECU)

Comes on After clearing DTCs, perform actuator angle neutral point calibration.

CAUTION / NOTICE / HINT

Note

When replacing the VGRS ECU (front steering control ECU) or steering actuator assembly, perform actuator angle neutral point calibration and initialization after replacing parts.

Click here

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs.

      Click here


      Chassis > VGRS > Clear DTCs
      Result
      Proceed to
      NEXT

    NEXT
  2. PERFORM VGRS SYSTEM CALIBRATION


    1. Perform VGRS system calibration.

      Click here


      Chassis > VGRS > Utility
      Tester Display
      Steering Angle Adjust
      Result
      Proceed to
      NEXT

    NEXT
  3. CHECK FOR DTC


    1. Check for DTCs.

      Click here


      Chassis > VGRS > Trouble Codes
      Result
      Result Proceed to
      DTC is not output A
      DTC C15B2/72 is output B
      DTC C1592/52 is output after VGRS system calibration has been performed 3 times or more C

      Note

      If DTC C1592/52 is output even though the VGRS system calibration has been performed, confirm the procedure again, and perform VGRS system calibration 3 times or more.


    A
    B
    C