CONDENSER(for GR Series Engine) REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

   Click here

2. REMOVE FRONT BUMPER ASSEMBLY

   for Sport Package:

   Click here

   for Standard:

   Click here

3. REMOVE INLET NO. 1 AIR CLEANER

   Click here

4. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

   Click here

5. DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

   Click here

6. REMOVE HOOD LOCK ASSEMBLY

   Click here

7. DISCONNECT ENGINE ROOM MAIN WIRE

   Click here

8. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

   Click here

9. DISCONNECT LIQUID TUBE SUB-ASSEMBLY A

   
   

   1. 

      Disengage the claw to open the service hole cover.

   2. 

      Remove the bolt.

   3. 

      Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.

   4. Remove the O-ring from the liquid tube sub-assembly A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

10. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

    
    

    1. 

       Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

       Note

       Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

11. REMOVE COOLER CONDENSER ASSEMBLY

    
    

    1. 

       Disengage the 2 claws.

    2. Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.