COMPRESSOR REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FAN AND GENERATOR V BELT

    for 2GR-FSE: Click here

    for 4GR-FSE: Click here

  3. REMOVE ENGINE UNDER COVER

    Click here

  4. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01MVBK

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnetic clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. DISCONNECT SUCTION HOSE


    1. A01MYVE

      Remove the bolt and disconnect the suction hose from the compressor and magnetic clutch.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  7. REMOVE COMPRESSOR AND MAGNETIC CLUTCH


    1. A01MXFF

      Disconnect the 2 connectors.

    2. Disengage the clamp.

    3. A01MZ0D

      Remove the 3 bolts and nut.

    4. A01MZ06

      Using an E8 "TORX" socket wrench, remove the stud bolt and compressor and magnetic clutch.

      Tech Tips

      Remove the compressor and magnetic clutch from the vehicle with the stud bolt remaining in the compressor and magnetic clutch.