LUMBAR SUPPORT ADJUSTER ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

PROCEDURE


  1. INSTALL FRONT SEATBACK HOOK

    Click here

  2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. Engage the 2 guides to install the lumbar support adjuster assembly to the front seatback frame sub-assembly.

    2. Engage the 2 claws.

    3. A0123LA

      Engage the clamp.

    4. Connect the connector to the lumbar support adjuster assembly.

  3. INSTALL FRONT SEATBACK EDGE PROTECTOR

    Click here

  4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Standard Seat Type)


    1. Temporarily install the separate type front seatback cover with pad.

    2. A001K7CC01
      *a Bracket

      Engage the 3 brackets and install the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover with pad must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. w/ Climate Control Seat System:


      1. Engage the 2 claws to install the seatback climate control blower to the separate type front seatback pad.

    4. w/ Seat Heater System:


      1. A0126PJ

        Engage the clamp.

      2. Connect the connector.

  5. INSTALL FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)


    1. Temporarily install the front seatback pad with cover.

    2. A001KRXC01
      *a Bracket

      Engage the 2 brackets and install the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the front seatback pad with cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. w/ Climate Control Seat System:


      1. Engage the 2 claws to install the seatback climate control blower to the front seatback pad with cover.

    4. w/ Seat Heater System:


      1. A0126PJ

        Engage the clamp.

      2. Connect the connector.

  6. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  7. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  9. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD

    Click here

  10. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)

    Click here

  11. CONNECT FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY

    Click here