FRONT SEAT ASSEMBLY(for Power Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Side)

    Click here

  2. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY

    Click here

  4. REMOVE SEAT ADJUSTER COVER CAP


    1. A012630

      Remove the 2 seat adjuster cover caps.

  5. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)


    1. w/o Climate Control Seat System:


      1. A0124T2

        Disconnect the rubber band of the separate type front seatback cover.

    2. w/ Climate Control Seat System:


      1. A0122SN

        Disengage the 2 hooks to disconnect each rubber band of the separate type front seatback cover.

  6. DISCONNECT FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)


    1. w/o Climate Control Seat System:


      1. A0124T2

        Disconnect the rubber band of the front seatback pad with cover.

    2. w/ Climate Control Seat System:


      1. A0122SN

        Disengage the 2 hooks to disconnect each rubber band of the front seatback pad with cover.

  7. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD


    1. A0125FI

      Remove the screw.

    2. Disengage the claw and clip.

    3. A0123LW

      Disengage the 2 claws as shown in the illustration.

    4. A01284P

      Disengage the 3 guides to remove the front seat inner No. 1 cushion shield.

  8. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01260F

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  9. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A0125H8

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  10. REMOVE FRONT SEAT CUSHION SHIELD


    1. A0126Y3

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. A0125F2

      Disengage the 2 clamps.

    3. A0127WN

      Disengage the 3 claws and open the wire harness cover.

    4. A0123EX

      w/o Seat Position Memory System:


      1. Disconnect the connector from the front power seat switch.

    5. A012699

      w/ Seat Position Memory System:


      1. Disconnect the 2 connectors from the front power seat switch.

    6. for Driver Side:


      1. A01265S

        Disconnect the connector from the front lumbar power seat switch.

  11. REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)

    Click here

  12. REMOVE FRONT POWER SEAT SWITCH (w/ Seat Position Memory System)

    Click here

  13. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)

    Click here

  14. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A01234F

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Standard Seat Type)


    1. A001IB7C01
      B003UDQ Fastener

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. w/ Seat Heater System:


      1. A0126PJ

        Disconnect the connector.

      2. Disengage the clamp.

      3. A012739

        Disengage the 3 clamps.

      4. Disconnect the connector.

    3. A01255V

      for Front Passenger Side:


      1. Disengage the claw to remove the connector.

    4. A0124QE

      Disengage the 12 hooks and remove the separate type front seat cushion cover with pad.

  16. REMOVE FRONT SEAT CUSHION PAD WITH COVER (for Sports Seat Type)


    1. A001IB7C01
      B003UDQ Fastener

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. w/ Seat Heater System:


      1. A0126PJ

        Disconnect the connector.

      2. Disengage the clamp.

      3. A012739

        Disengage the 3 clamps.

      4. Disconnect the connector.

    3. A01255V

      for Front Passenger Side:


      1. Disengage the claw to remove the connector.

    4. A0124QE

      Disengage the 12 hooks and remove the front seat cushion pad with cover.

  17. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for Standard Seat Type)


    1. A0126PS

      Remove the 3 hog rings.

    2. A012313

      Remove the 18 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  18. REMOVE FRONT SEAT HEADREST SUPPORT


    1. for Standard Seat Type:


      1. A0123J7

        Pull out the 2 fasteners.

      2. A0124NB

        Remove the 2 hog rings.

    2. for Sports Seat Type:


      1. A001JT2C01
        B003UDQ Tab

        Pull out the 2 tabs.

    3. A0126TM

      Remove the 3 hog rings.

    4. A0126BH

      Open the 2 fasteners.

    5. A0123WQ

      Disengage each claw and remove the 2 front seat headrest supports.

  19. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Standard Seat Type)


    1. w/ Climate Control Seat System:


      1. A0123B0

        Disengage the 2 claws to separate the seatback climate control blower from the separate type front seatback pad.

    2. A001K7CC01
      *a Bracket

      Remove the 2 nuts and disengage the 3 brackets.

    3. Remove the separate type front seatback cover with pad.

  20. REMOVE FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)


    1. w/ Climate Control Seat System:


      1. A0123B0

        Disengage the 2 claws to separate the seatback climate control blower from the front seatback pad with cover.

    2. A001KRXC01
      *a Bracket

      Remove the 2 nuts and disengage the 2 brackets.

    3. Remove the front seatback pad with cover.

  21. REMOVE FRONT SEAT AIRBAG ASSEMBLY

    Click here

  22. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)


    1. A001HKFC01
      B003UDQ Fastener

      Disengage the 2 fasteners.

    2. A0122TA

      Remove the 14 hog rings to remove the separate type front seatback cover from the separate type front seatback pad.

  23. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. A0127Q4

      Disconnect the connector.

    2. A01249U

      Remove the clip.

    3. A0125HE

      Disengage the 4 hooks to remove the seatback climate control blower.

  24. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System)


    1. A0126EE

      Disengage the 2 claws and remove the seat cushion climate control duct from the seat cushion climate control blower assembly.

  25. REMOVE SEAT CUSHION CLIMATE CONTROL BRACKET (w/ Climate Control Seat System)


    1. A0124BK

      Remove the 2 screws and seat cushion climate control bracket from the seat cushion climate control blower assembly.

  26. REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY (w/ Climate Control Seat System)


    1. A0125S0

      Disconnect the connector.

    2. A0126BX

      Disengage the 2 hooks to remove the seat cushion climate control blower assembly.

  27. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A0125H7

      Disengage the 2 guides to remove the reclining adjuster inside cover LH.

  28. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Perform the same procedure as for the LH side.

  29. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. A001JA6N01

      Disengage the clip A.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip B to remove the front seat lower cushion shield LH.

  30. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. A0124J7

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip to remove the front seat lower cushion shield RH.

  31. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH


    1. A0123D9

      Disengage the clamp.

    2. A0125CI

      Remove the screw.

    3. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  32. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH


    1. A0125NL

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  33. REMOVE FRONT SEAT NO.2 WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat No. 2 wire.

  34. REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat wire.

  35. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A0125RH

      Remove the 4 bolts.

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly from the front seat cushion spring assembly.

  36. REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. A0127PC

      Disengage each claw to remove the 2 front seatback edge protectors from the front seatback frame sub-assembly.

  37. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)

    Click here

  38. REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)


    1. A01262L

      Disengage the 2 claws.

    2. Disengage the 2 guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly.

  39. REMOVE FRONT SEATBACK HOOK (for Driver Side)


    1. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.

  40. REMOVE FRONT SEATBACK HOOK (for Front Passenger Side)


    1. Remove the 2 front seatback hooks from the front seatback spring sub-assembly.

  41. REMOVE FRONT SEAT CUSHION SPRING


    1. A01244H

      Disengage the 6 hooks to remove the front seat cushion spring from the front seat adjuster assembly.

  42. REMOVE SEAT BELT HOLE COVER


    1. A0127G3

      Disengage the claw and remove the seat belt hole cover from the front seat adjuster assembly.