TIRE PRESSURE WARNING INITIATOR(for Rear Side) REMOVAL

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

2. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)

   Click here

3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

   Click here

4. REMOVE SPARE WHEEL COVER TRAY (w/o Spare Tire)

   Click here

5. REMOVE SPARE WHEEL COVER TRAY LH (w/ Spare Tire)

   Click here

6. REMOVE DECK SIDE TRIM BOX LH

   Click here

7. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

   Click here

9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

   Click here

10. REMOVE REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)

    Click here

11. REMOVE NO. 2 ROOM PARTITION COVER (for Fold Down Seat Type)

    Click here

12. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

13. REMOVE REAR WHEEL LH

14. REMOVE REAR TIRE PRESSURE MONITOR INITIATOR

    
    

    1. 

       Disconnect the connector.

    2. Pull back the rear wheel house liner LH so that the rear tire pressure monitor initiator can be removed.

    3. 

       *a

       Grommet

       Disengage the grommet.

    4. Remove the 2 nuts and rear tire pressure monitor initiator.