FRONT STABILIZER BAR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEELS

  2. REMOVE ENGINE UNDER COVER

    for 2GR-FSE: Click here

    for 8AR-FTS: Click here

  3. REMOVE SUSPENSION TOWER DAMPER

    Click here

  4. REMOVE FRONT UPPER NO. 2 SUSPENSION MEMBER

    for 2GR-FSE: Click here

    for 8AR-FTS: Click here

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. B003WES

      Remove the 2 nuts and front stabilizer link assembly LH from the front stabilizer bar and front lower suspension arm assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  6. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  7. REMOVE REAR ENGINE UNDER COVER LH

    for 2GR-FSE: Click here

    for 8AR-FTS: Click here

  8. REMOVE REAR ENGINE UNDER COVER RH

    Tech Tips

    Perform the same procedure as for the LH side.

  9. REMOVE FRONT NO. 2 STABILIZER BRACKET LH


    1. B003THL

      Remove the 2 bolts and front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bracket LH.

  10. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as for the LH side.

  11. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the vehicle.

  12. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING


    1. Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.

  13. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. B003TW0

      for LHD:


      1. Separate the wire harness clamp from the front No. 1 stabilizer bracket LH.

      2. Remove the 4 bolts and front No. 1 stabilizer bracket LH from the frame.

    2. B003WRO

      for RHD:


      1. Separate the 2 wire harness clamps from the front No. 1 stabilizer bracket LH.

      2. Remove the 4 bolts and front No. 1 stabilizer bracket LH from the frame.

  14. REMOVE FRONT NO. 1 STABILIZER BRACKET RH


    1. B003X2B

      for LHD:


      1. Separate the 2 wire harness clamps from the front No. 1 stabilizer bracket RH.

      2. Remove the 4 bolts and front No. 1 stabilizer bracket RH from the frame.

    2. B003VHS

      for RHD:


      1. Separate the wire harness clamp from the front No. 1 stabilizer bracket RH.

      2. Remove the 4 bolts and front No. 1 stabilizer bracket RH from the frame.