ABSORBER CONTROL ACTUATOR(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  4. REMOVE SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

  5. REMOVE SPARE WHEEL COVER TRAY LH (w/ Spare Tire)

    Click here

  6. REMOVE SPARE WHEEL COVER TRAY RH (w/ Spare Tire)

    Click here

  7. REMOVE DECK SIDE TRIM BOX LH

    Click here

  8. REMOVE DECK SIDE TRIM BOX RH

    Click here

  9. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

    Click here

  11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

  12. SEPARATE LUGGAGE COMPARTMENT TRIM COVER

    Click here

  13. REMOVE ABSORBER CONTROL ACTUATOR


    1. Turn back the luggage compartment trim cover until the absorber control actuator can be seen.

    2. B003TRUC02
      *a 40°

      Disconnect the connector.

    3. Turn the absorber control actuator counterclockwise 40° to remove it from the rear actuator support bracket.

      Note


      • Do not turn the absorber control actuator more than 40°.

      • Do not drop the absorber control actuator. If it is dropped, replace it with a new one.