REAR ACCELERATION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ACCELERATION SENSOR ASSEMBLY


    1. Install the acceleration sensor assembly with the bolt.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

      Note


      • Avoid any impact to the acceleration sensor assembly.

      • Do not drop the acceleration sensor assembly. If it is dropped, replace it with a new one.

    2. Connect the connector.

    3. Return the luggage compartment trim cover RH to its original position.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH


    1. B003VZ5N02

      Install the luggage compartment trim cover RH with the 3 clips (A).

    2. Install a new clip (B).

    3. Install the rope hook assembly with the bolt.

    4. Engage the 2 claws to close the cover.

  3. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

    Click here

  4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

  5. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  6. INSTALL DECK SIDE TRIM BOX RH

    Click here

  7. INSTALL DECK SIDE TRIM BOX LH

    Click here

  8. INSTALL SPARE WHEEL COVER TRAY RH (w/ Spare Tire)

    Click here

  9. INSTALL SPARE WHEEL COVER TRAY LH (w/ Spare Tire)

    Click here

  10. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

  11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here