REAR DIFFERENTIAL CARRIER ASSEMBLY(for 2GR-FSE) COMPONENTS

ILLUSTRATION

B003UAJC05
*1 TAIL EXHAUST PIPE ASSEMBLY *2 TAIL EXHAUST PIPE LH

ILLUSTRATION

B003WBDC12
*1 REAR DIFFERENTIAL CARRIER ASSEMBLY *2 REAR UPPER DIFFERENTIAL MOUNT STOPPER
*3 REAR LOWER DIFFERENTIAL MOUNT STOPPER - -
B003WAH N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
B003VVG Do not apply lubricants to the threaded parts *T1

Bolt Type A: 95.1 N*m (970 kgf*cm, 70 ft.*lbf)

Bolt Type B: 88.9 N*m (907 kgf*cm, 66 ft.*lbf)

ILLUSTRATION

B003UK1C04
*1 REAR DIFFERENTIAL BREATHER PLUG *2 REAR DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR
*3 REAR DIFFERENTIAL CARRIER COVER *4 REAR DIFFERENTIAL CARRIER OIL SEAL
*5 REAR DIFFERENTIAL CARRIER STRAIGHT PIN *6 REAR DIFFERENTIAL DRAIN PLUG
*7 REAR DIFFERENTIAL DRIVE PINION BEARING SPACER *8 REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
*9 REAR DIFFERENTIAL DUST DEFLECTOR *10 REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL
*11 REAR DIFFERENTIAL SIDE GEAR SHAFT SHAFT SNAP RING *12 REAR DRIVE PINION COMPANION FLANGE
*13 REAR DRIVE PINION FRONT TAPERED ROLLER BEARING *14 REAR DRIVE PINION NUT
*15 REAR DIFFERENTIAL FILLER PLUG *16 GASKET
*T1 Preload Adjust Torque: 490 N*m (4997 kgf*cm, 361 ft.*lbf) or less - -
B003WAH N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
B003WAF Hypoid gear oil LSD - -

ILLUSTRATION

B003WMZC06
*1 DIFFERENTIAL DRIVE PINION *2 DIFFERENTIAL RING GEAR
*3 REAR DIFFERENTIAL CASE BEARING *4 REAR DIFFERENTIAL CASE SUB-ASSEMBLY
*5 REAR DRIVE PINION REAR TAPERED ROLLER BEARING *6 REAR DIFFERENTIAL DRIVE PINION PLATE WASHER
*T1

1st: 63.7 N*m (650 kgf*cm, 47 ft.*lbf)

2nd: 60° to 90°

- -
B003WAH N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
B003WAF Hypoid gear oil LSD Precoated Part