REAR DIFFERENTIAL CARRIER OIL SEAL(for 8AR-FTS) COMPONENTS
ILLUSTRATION
| *1 | DIFFERENTIAL DRIVE PINION | *2 | REAR DIFFERENTIAL CARRIER COVER |
| *3 | REAR DIFFERENTIAL CARRIER OIL SEAL | *4 | REAR DIFFERENTIAL CASE BEARING |
| *5 | REAR DIFFERENTIAL CASE SUB-ASSEMBLY | *6 | REAR DIFFERENTIAL DRIVE PINION BEARING SPACER |
| *7 | REAR DIFFERENTIAL DRIVE PINION OIL SLINGER | *8 | REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL |
| *9 | REAR DIFFERENTIAL SIDE GEAR SHAFT SNAP RING | *10 | REAR DRIVE PINION COMPANION FLANGE |
| *11 | REAR DRIVE PINION FRONT TAPERED ROLLER BEARING | *12 | REAR DRIVE PINION NUT |
| *13 | REAR DIFFERENTIAL FILLER PLUG | *14 | REAR DIFFERENTIAL DRAIN PLUG |
| *15 | GASKET | - | - |
| *T1 | Preload adjusting torque: 490 N*m (4997 kgf*cm, 361 ft.*lbf) or less | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Hypoid gear oil LSD | - | - |