REAR DIFFERENTIAL CARRIER OIL SEAL(for 4GR-FSE) REPLACEMENT

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE REAR DIFFERENTIAL CARRIER COVER

    Click here

  3. SECURE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  4. REMOVE REAR DRIVE PINION NUT

    Click here

  5. REMOVE REAR DRIVE PINION COMPANION FLANGE

    Click here

  6. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL


    1. A01MUW7C04
      *1 Rear Differential Carrier Oil Seal

      Using SST, remove the rear differential carrier oil seal from the rear differential carrier.

      SST
      09308-00010

      Tech Tips

      When replacing the rear differential carrier oil seal, also replace the rear differential drive pinion bearing spacer, and then adjust the differential drive pinion preload.

  7. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

    Click here

  8. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING

    Click here

  9. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER

    Click here

  10. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER

    Click here

  11. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING

    Click here

  12. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

    Click here

  13. INSTALL REAR DRIVE PINION COMPANION FLANGE

    Click here

  14. REMOVE REAR DRIVE PINION COMPANION FLANGE

    Click here

  15. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL


    1. A01MY3YC04
      *1 Rear Differential Carrier Oil Seal
      *a Oil Seal Installation Depth

      Using SST and a hammer, install a new rear differential carrier oil seal.

      SST
      09554-22010
      Oil seal installation depth
      1.55 to 2.45 mm (0.0610 to 0.0964 in.)

      Note


      • Make sure the difference between the maximum and minimum measured values is less than 0.65 mm (0.0256 in.), as a greater difference may lead to oil leaks.

      • Tap the oil seal uniformly so that the oil seal is straight.

      • Do not excessively tap the oil seal.

  16. INSTALL REAR DRIVE PINION COMPANION FLANGE

    Click here

  17. ADJUST DIFFERENTIAL DRIVE PINION PRELOAD

    Click here

  18. INSPECT TOTAL PRELOAD

    Click here

  19. STAKE REAR DRIVE PINION NUT

    Click here

  20. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  21. INSTALL REAR DIFFERENTIAL CARRIER COVER

    Click here

  22. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here