PARKING BRAKE ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

    Click here

  3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

    Click here

  4. REMOVE REAR DISC

    Click here

  5. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Upper Side)


    1. A001IJEN01

      Using SST, remove the parking brake shoe return tension spring.

      SST
      09703-30011

  6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Lower Side)


    1. A001ISEN01

      Using SST, remove the parking brake shoe return tension spring.

      SST
      09703-30011

  7. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A01MZ74

      Slide the parking brake shoe, remove the parking brake shoe adjusting screw set.

  8. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    1. A001HPZN01

      Using SST, remove the parking brake shoe hold down spring cup, parking brake shoe hold down compression spring and parking brake shoe hold down spring pin.

      SST
      09718-00011

    2. Remove the No. 2 parking brake shoe assembly.

  9. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A001IE0N01

      Using SST, remove the parking brake shoe hold down spring cup, parking brake shoe hold down compression spring and parking brake shoe hold down spring pin.

      SST
      09718-00011

    2. Remove the No. 1 parking brake shoe assembly.

  10. REMOVE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY


    1. A01MWKU

      Slide the parking brake shoe lever sub-assembly.

    2. A01MUHM

      Separate the No. 3 parking brake cable assembly to remove the parking brake shoe lever sub-assembly.

  11. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01MXQI

      Remove the nut and separate the No. 3 parking brake cable assembly.

  12. REMOVE PARKING BRAKE ANCHOR BLOCK SUB-ASSEMBLY


    1. Remove the rear axle hub and bearing assembly.

      Click here

    2. A01MWY0

      Remove the 2 nuts, cable support bracket and parking brake anchor block sub-assembly.