FRONT BRAKE(for 2GR-FSE, 8AR-FTS, 2GR-FKS) REASSEMBLY

PROCEDURE


  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

    Tech Tips

    Fully tighten the front disc brake bleeder plug after bleeding the system.

  2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL


    1. A0127MFC01
      B003V9P Lithium Soap Base Glycol Grease

      Apply lithium soap base glycol grease to the entire circumference of 4 new piston seals.

    2. Install the 4 piston seals to the front disc brake cylinder.

      Note

      Securely install the piston seal into the groove of the front disc brake cylinder.

  4. INSTALL FRONT DISC BRAKE PISTON


    1. A0125AVC01
      *1 Cylinder Boot
      *2 Front Disc Brake Piston
      B003V9P Lithium Soap Base Glycol Grease

      Apply lithium soap base glycol grease to the entire circumference of 4 new cylinder boots.

    2. Install the 4 cylinder boots to the 4 front disc brake pistons.

    3. Apply a light layer of lithium soap base glycol grease to the contact surfaces of the 4 front disc brake pistons, and install them to the front disc brake cylinder.

      Note

      Do not forcibly install the front disc brake piston into the front disc brake cylinder.

  5. INSTALL CYLINDER BOOT


    1. A0126X0C02
      *1 Cylinder Boot
      *2 Front Disc Brake Cylinder
      *3 Front Disc Brake Piston

      Install the 4 cylinder boots to the dust seal retainers of the front disc brake cylinder and the groove of the front disc brake pistons.

      Note


      • Securely install the cylinder boots into the front disc brake cylinder and grooves of the front disc brake piston.

      • Do not damage the cylinder boots.