VACUUM PUMP(for 8AR-FTS) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (for LHD)

    Click here

  2. REMOVE NO. 3 VENTILATION HOSE (for LHD)


    1. B003U50

      Slide the clip and disconnect the No. 3 ventilation hose from the cylinder head cover sub-assembly.

    2. Disengage the clamp.

  3. PRECAUTION (for RHD)

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for RHD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. REMOVE BATTERY (for RHD)

    Click here

  6. SEPARATE ENGINE WIRE (for RHD)


    1. B003WUT

      Disengage the 2 clamps to separate the engine wire.

  7. DISCONNECT UNION TO CHECK VALVE HOSE


    1. for LHD:


      1. B003X85

        Slide the clip and disconnect the union to check valve hose from the vacuum pump assembly.

    2. for RHD:


      1. B003TA8

        Slide the clip and disconnect the union to check valve hose from the vacuum pump assembly.

  8. REMOVE VACUUM PUMP ASSEMBLY


    1. for LHD:


      1. B003V07

        Disconnect the No. 2 vacuum transmitting hose assembly from the vacuum pump assembly.

      2. B003UID

        Remove the 4 bolts and vacuum pump assembly from the engine assembly.

    2. for RHD:


      1. B003WH0

        Disconnect the No. 2 vacuum transmitting hose assembly from the vacuum pump assembly.

      2. B003WB4

        Remove the 4 bolts and vacuum pump assembly from the engine assembly.

    3. B003TVAC03
      *1 No. 2 O-ring
      *2 No. 3 O-ring

      Remove the No. 2 O-ring and No. 3 O-ring from the vacuum pump assembly.