EXTENSION HOUSING REAR OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  2. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A01MWSEN02

      Using SST, remove the automatic transmission extension housing oil seal.

      SST
      09308-00010

  3. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. Coat the lip of a new automatic transmission extension housing oil seal with MP grease.

    2. A01MVK1C02
      *a 5.4 to 5.8 mm (0.213 to 0.228 in.)

      Using SST and a hammer, tap in the automatic transmission extension housing oil seal.

      SST
      09325-40010
      Standard depth
      5.4 to 5.8 mm (0.213 to 0.228 in.)

      Note


      • Keep the lip free of foreign matter.


      • Do not tap the oil seal at an angle.

  4. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  5. ADJUST AUTOMATIC TRANSMISSION FLUID

    Click here

  6. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK