VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. A01MUHRC02
      *1 Check Ball Body and Compression Spring
      *2 Accumulator Piston

      Install the check ball body and the compression spring.

    2. Check the accumulator pistons, check ball body and compression spring shown in the illustration.

    3. Connect the manual valve connecting rod sub-assembly to the manual valve lever sub-assembly.

    4. A01MYEXN04

      Install the transmission valve body assembly with the 19 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
      Bolt Length
      Bolt Bolt Length
      A 25 mm (0.984 in.)
      B 36 mm (1.417 in.)
      C 45 mm (1.772 in.)
      D 50 mm (1.969 in.)

    5. Install the detent spring and the detent spring cover with the bolt.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  2. CONNECT TRANSMISSION WIRE

    Click here

  3. RESET MEMORY

    Click here