LANE RECOGNITION CAMERA SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Note

If the lane departure warning camera bracket is deformed or damaged, replace it together with the windshield glass.
When replacing the windshield glass of a vehicle equipped with a lane departure warning camera, make sure to use a Lexus genuine part. The lane departure warning camera may not be able to be installed due to a missing bracket or the lane departure alert system may not operate properly due to a difference in the transmissivity or black ceramic border.
If the lane departure warning camera is dropped, replace it with a new one.

PROCEDURE

INSTALL LANE DEPARTURE WARNING CAMERA (for LHD)
1. When using a new lane departure warning camera:
  1. Remove the protective film.
    
    Note
    
    Do not touch the camera lens after removing the protective film.
2. Engage the 2 guides as shown in the illustration.
  
  Note
  
  Do not touch the camera lens.
3. Engage the guide as shown in the illustration.
4. Connect the connector to install the lane departure warning camera.
INSTALL LANE DEPARTURE WARNING CAMERA COVER (for LHD)
1. Engage the 4 guides to install the lane departure warning camera cover as shown in the illustration.
INSTALL LANE DEPARTURE WARNING CAMERA (for RHD)
1. When using a new lane departure warning camera:
  1. Remove the protective film.
    
    Note
    
    Do not touch the camera lens after removing the protective film.
2. Engage the 2 guides as shown in the illustration.
  
  Note
  
  Do not touch the camera lens.
3. Engage the guide as shown in the illustration.
4. Connect the connector to install the lane departure warning camera.
INSTALL LANE DEPARTURE WARNING CAMERA COVER (for RHD)
1. Engage the 4 guides to install the lane departure warning camera cover as shown in the illustration.
ADJUST LANE DEPARTURE WARNING CAMERA

Click here